LDN^® Dynamic Drive Part-Circle

Flows: 1.43 to 8.79 gpm (325 to 1996 L/hr)

Pressures: 10 to 30 psi (0.69 to 2.07 bar)

Product Tabs

Overview

The Dynamic Drive Part-Circle is an innovative solution built on Senninger’s successful LDN® sprinkler platform. It offers a modular design and easy-to-clean nozzles for efficient maintenance. Its advanced brake technology ensures smooth, consistent movement for wide and uniform water distribution.

This part-circle sprinkler is particularly useful for managing irrigation near pivot towers, effectively directing water away from wheel tracks to minimize rutting. By preventing excessive water accumulation in these areas, the Dynamic Drive Part-Circle helps maintain overall field uniformity, prevents equipment damage, and ensures consistent travel speed, ultimately enhancing irrigation efficiency and crop health.

Advanced Features

LDN Bracket

The versatile LDN platform has a modular design that makes it easy to change deflectors and maintain the sprinkler.

With the UP3 design, the base is an integral part of the bracket. It can be installed directly into a pressure regulator or NPT female fitting. This increases reliability and means fewer parts are required.

Advanced Braking Mechanism

Advanced brake technology used since 2002 in Senninger’s solid set products provides the optimum control and consistency needed for pivot irrigation.

Models

Copy Link

Part-Circle (mustard deflector)

Dynamic Drive Part-Circle

Model	Description
LDNDD00DPC12G	LDN® Dynamic Drive, Drop, Part-Circle (mustard deflector), less nozzle

Engine Modules

Model	Description
LDNDDEMASMDPC12G	LDN® Dynamic Drive Engine Module Assembly, Drop, Part-Circle (mustard deflector)

Specs

Copy Link

Dynamic Drive Part-Circle

DYNAMIC DRIVE PART-CIRCLE DESIGN CRITERIA	Part Circle (mustard deflector)
Nozzle Sizes*
Nozzle number	#8 - #15
Nozzle orifice size	1/8" - 15/64"
Flows
Minimum	1.43 gpm
Maximum	8.79 gpm
Radius
9 ft height	21 - 27 ft
Pressure at the nozzle
Minimum and maximum	10 - 30 psi

*It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.
Note: When outlet spacing exceeds 10 ft (3.0 m), keep Dynamic Drive sprinklers above crop canopy. This is especially important on high profile crops.
Not warranted for rigid installation on offsets or booms larger than 10.5 ft (3.2 m).

Dynamic Drive Part-Circle (metric)

DYNAMIC DRIVE PART-CIRCLE DESIGN CRITERIA	Part Circle (mustard deflector)
Nozzle Sizes*
Nozzle number	#8 - #15
Nozzle orifice size	3.18 - 5.95 mm
Flows
Minimum	325 L/hr
Maximum	1996 L/hr
Radius
2.74 m height	6.4 - 8.2 m
Pressure at the nozzle
Minimum and maximum	0.69 - 2.07 bar