The UP3® Dual Nozzle Carrier lets irrigators easily switch between flow rates without having to carry nozzles or tools into the field.
To access the secondary nozzle, pinch and pull the nozzle from the applicator, flip the carrier over and click in the secondary nozzle. The carrier is marked to indicate high and low flow nozzles. When installed in the applicator, if HIGH is visible on the carrier, then the lower flow nozzle in in use. If LOW is visible on the carrier, the higher flow nozzle is in use.
Designed to be used instead of a standard barb x threaded fitting, this device carries two additional UP3® nozzles. Just pinch and pull to remove nozzles and place and click to reinstall. Nozzles are easily identifiable with numbers on the ears. The larger the number, the higher the flow.
The Senninger Fan Spray is extremely durable with no moving parts and is often used to assist with end-of-pivot flush. With its directional spray pattern, is ideal for distributing water away from wheel tracks.
Senninger goosenecks are constructed of non-corrosive, UV-resistant thermoplastic materials for long life. This reduces plugging from rust flaking sometimes associated with galvanized goosenecks.
Senninger's single and double 125º goosenecks used with truss rod hose slings provide easy positioning of drops along the center pivot span. They help lower application intensity by increasing the wetted area of coverage to promote better soil infiltration.
Senninger's low pressure End Spray is designed for use at the end of a machine. It can help irrigate the area between the last sprinkler and the end gun. The low angle design resists the effects of wind and the large orifice resists clogging.
