| Filter Regulator DESIGN CRITERIA |
Preset Operating Pressure | Maximum Inlet Pressure | Mesh Filter Screen | Orifice |
| FPSR2063M3F20 | 0.41 bar | 5.51 bar | 20 mesh (black rings) | 841 microns |
| FPSR2063M3F30 | 0.41 bar | 5.51 bar | 30 mesh (green rings) | 595 microns |
| FPSR2063M3F40 | 0.41 bar | 5.51 bar | 40 mesh (grey rings) | 400 microns |
| FPSR2103M3F20 | 0.69 bar | 6.20 bar | 20 mesh (black rings) | 841 microns |
| FPSR2103M3F30 | 0.69 bar | 6.20 bar | 30 mesh (green rings) | 595 microns |
| FPSR2103M3F40 | 0.69 bar | 6.20 bar | 40 mesh (grey rings) | 400 microns |
| FPSR2103M3F120 | 0.69 bar | 6.20 bar | 120 mesh screen (red rings) | 125 microns |
| FPSR2103M3F140 | 0.69 bar | 6.20 bar | 140 mesh screen (blue rings) | 105 microns |
| FPSR2153M3F20 | 1.03 bar | 6.55 bar | 20 mesh (black rings) | 841 microns |
| FPSR2153M3F30 | 1.03 bar | 6.55 bar | 30 mesh (green rings) | 595 microns |
| FPSR2153M3F40 | 1.03 bar | 6.55 bar | 40 mesh (grey rings) | 400 microns |
| FPSR2153M3F120 | 1.03 bar | 6.55 bar | 120 mesh screen (red rings) | 125 microns |
| FPSR2153M3F140 | 1.03 bar | 6.55 bar | 140 mesh screen (blue rings) | 105 microns |
| FPSR2203M3F20 | 1.38 bar | 6.89 bar | 20 mesh (black rings) | 841 microns |
| FPSR2203M3F30 | 1.38 bar | 6.89 bar | 30 mesh (green rings) | 595 microns |
| FPSR2203M3F40 | 1.38 bar | 6.89 bar | 40 mesh (grey rings) | 400 microns |
| FPSR2203M3F120 | 1.38 bar | 6.89 bar | 120 mesh screen (red rings) | 125 microns |
| FPSR2203M3F140 | 1.38 bar | 6.89 bar | 140 mesh screen (blue rings) | 105 microns |
125 and 100 mesh models designed for use with drip systems.
The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 0.34 bar above the expected outlet pressure, with flows up to 2498 L/hr, but not exceeding the maximum inlet pressure of 80 psi (5.5 bar) above the model’s pressure rating. Higher flows require additional inlet pressure to engage the regulator. Where flows are greater than 2498 L/hr, the inlet pressure should be at least 0.62 bar above the expected outlet pressure but not exceeding the maximum inlet pressure of 80 psi (5.5 bar) above the model’s pressure rating.
Pressure regulators should always be installed downstream of all shut-off valves.
Recommended for outdoor use only. Not NSF certified.
