Wastewater Effluent Solutions

The Senninger® F-luent Master sprinklers are designed specifically for disposing effluent by the land treatment method in accordance with EPA guidelines.
F-luent models are designed using engineering-grade thermoplastics, which makes them resistant to corrosion, abrasion, and ultraviolet degradation. While Senninger has developed a specific line of products for non-potable water, many sprinklers designed for agriculture are used worldwide with reclaimed water and effluent solutions.

  • 5023-EFF Sprinkler

    Ideal for systems operating at 30 to 65 psi (2.07 to 4.48 bar) requiring sprinkler flow between 6.5 to 20.1 gpm (1476 to 4565 L/hr).

    The 5023-EFF impact sprinkler features a lavender cap to correspond to industry standards denoting the use of non-potable water. It's designed with an effluent vane that minimizes obstruction from water-borne materials, stainless steel springs, and a fulcrum pin enclosed to resist contamination. Electrolysis is eliminated by using no brass parts.

    View 5023 Series Sprinklers
  • 7025RD-EFF Sprinkler

    Ideal for systems operating at 40 to 70 psi (2.76 to 4.83 bar) requiring sprinkler flow between 8.66 to 31.6 gpm (1967 to 7177 L/hr).

    The 7025RD-EFF impact sprinkler features a lavender cap to correspond to industry standards denoting the use of non-potable water. It's designed with an effluent vane that minimizes obstruction from water-borne materials, stainless steel springs, and a fulcrum pin enclosed to resist contamination. Electrolysis is eliminated by using no brass parts.

    View 7025RD Series Sprinklers
  • 8025 HR-EFF Sprinkler

    Ideal for systems operating at 40 to 70 psi (2.76 to 4.83 bar) requiring sprinkler flow between 25.2 to 103.2 gpm (5724 to 23439 L/hr).

    The 8025 HR-EFF impact sprinkler features a lavender cap to correspond to industry standards denoting use of non-potable water. It's designed with an effluent vane that minimizes obstruction from water-borne materials, stainless steel springs, and a fulcrum pin enclosed to resist contamination. Electrolysis is eliminated by using no brass parts.

    View 8025-HR Series Sprinklers
  • Part-Circle EFF Sprinklers

    Senninger’s Part-Circle sprinklers are designed specifically for use where a directional impact sprinkler is required.

    These sprinklers features a lavender cap to correspond to industry standards denoting the use of non-potable water. They are designed to distribute water in a 60° to 360° adjustable pattern in 5° increments in a 23° trajectory.

    View Part-Circle Sprinklers
  • PMR-MF EFF

    The PMR-MF (Pressure Master Regulator Medium-Flow) is ideal for installations requiring mid-range flows of 2 to 20 gpm (454 to 4542 L/hr). Models with a lavender top are designed specifically for wastewater effluent applications.

    View PMR Models
  • PRU

    The PRU (Pressure Regulator Ultra) was designed to handle higher flows of 20 to 100 gpm (4543 - 22713 L/hr). Its 2-inch inlet and outlet size make it an ideal option for accurate zone and individual sprinkler pressure control in various applications, including effluent installations.

    View PRU Models