The SenningerXi-Wob uses patented counter-balance technology which makes it ideal for installation on semi-rigid PE and steel drops. The Xi-Wob provides ultra-low application intensity by delivering water over a larger area in a uniform pattern. This lowers the impact of the sprinkler pattern on the soil structure, preserving the soil’s ability to absorb water.

The preservation of intake rate, increases soak time greatly reducing the potential for soil compaction, soil sealing and irrigation water run-off. The Xi-Wob is available with three different deflectors based on the desired droplet size needed. The unique design of the Xi-Wob provides relatively uniform-sized droplets that are adequate in size to resist wind distortion.

Features:

• Models:
- 615 – 6-groove 15-degree trajectory (black deflector); larger sized droplets
- 610 – 6-groove 10-degree trajectory (blue deflector); medium sized droplets
- 910 – 9-groove 10 degree trajectory (grey deflector); smaller sized droplets
- 605 – 6-groove 5 degree trajectory Top-of-Pipe model (white deflector); medium sized droplets

• Flows:  1.09 to 15.8 gpm (248 to 3584 L/hr)
• Low pressure operation saves money and energy: 10 – 15 psi (0.69 – 1.03 bar)
• Backed by 2-year warranty on materials, workmanship and performance

Senninger’s Xi-Wob 605-TOP literally turns the popular Xi-Wob® upside down. It is ideal for reducing over-watering by allowing wide spacing (up to 20 feet) and providing a wind-resistant pattern with extremely uniform coverage.

EASY CLEAN NOZZLE (patent pending)

The easy snap-in nozzle feature is the biggest benefit to irrigators. Just pinch and pull to remove the nozzle; place and click to re-install. Cleaning and changing nozzles is so convenient – no need to disassemble or remove the sprinkler. The new DUAL NOZZLE CARRIER is now available for systems requiring two flows. Pinch and pull to remove the nozzle; flip; place and click to re-install.

NOZZLE VISIBILITY

The color-coded nozzles are highly visible and easy to identify. The nozzle numbers (corresponding to orifice size in 64ths of an inch) are visible on the ears, with half-sizes denoted beneath the second digit and notches on the lower edge of the nozzle. This same nozzle is universal to the i-Wob, Xi-Wob and LDN.

DUAL NOZZLE CARRIER

When two flows are needed from the same sprinkler package, just pinch and pull to remove the nozzle; flip; place and click to re-install. Cleaning and changing nozzles is so convenient—no need to disassemble or remove the sprinkler.

NOZZLE PATTERN

The image shows a simulation of the overhead pattern distribution of the Xi-Wob®