Senninger’s Pivot Special Regulator is designed to handle flows along the length of a center pivot or other mechanical-move system. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.
Features
• 100% water tested for accuracy
• Tamper-proof housing
• Maximum flow path resists plugging
• Very low hysteresis and friction loss • Pressures: 6-50 psi (114 - 3407 L/hr)
• Flows: 0.5 to 15 gpm (1.89 to 56.78 L/m)
• Inlet sizes: 3/4” F NPT
• Outlet sizes: 3/4” F NPT
• Backed by 2-year warranty on materials, workmanship and performance
Model #
Preset Operating
Maximum Inlet Pressure
Flow Range
PSR-6
6 psi (0.41 bar)
100 psi (6.90 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-10
10 psi (0.69 bar)
120 psi (8.27 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-12
12 psi
(0.83 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-15
15 psi
(1.03 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-20
20 psi
(1.38 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-25
25 psi
(1.72 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-30
30 psi
(2.07 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-35
35 psi
(2.41 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-40
40 psi
(2.76 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
PSR-50
50 psi
(3.45 bar)
135 psi (9.31 bar)
0.5-15 gpm
(114 – 3407 L/hr)
Caution:
Always install pressure regulators downstream from all shut-off valves
Feeling the Pressure
Numerous factors cause changes in pressure. These changes affects flow, uniformity and diameter.
Water flow volumes Higher pressure causes flow to increase.
Illustrations above reflect data of Xcel-Wobbler with #8 nozzle.
Senninger’s Pivot Special Regulator is designed to handle flows along the length of a center pivot or other mechanical-move system. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.
