Senninger’s Extended Flow Pressure-Master Regulator is now available in a new Limit Valve model. The PRXF-LV is designed to limit static (no flow) water pressure between the regulation point and a downstream shut-off valve, thus protecting in-line components. It can handle flows up to 75 gpm [17034 L/hr]. It is ideal for installations requiring accurate zone pressure regulation. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.
Features
• 100% water tested for accuracy
• Limits downstream pressure to no more than 15 psi above regulated pressure rating during static (no flow) conditions
• Very low hysteresis and friction loss
• Pressures: 30-50 psi (2.07 - 3.45 bar)
• Flows: 15 - 75 gpm (3407 - 17034 L/hr)
• Inlet sizes: 3" F socket
• Outlet sizes: 3" F socket
• Backed by 1-year warranty on materials, workmanship and performance
Model #
Preset Operating
Maximum Inlet Pressure
Flow Range
PRXF-LV-30
30 psi
(2.07 bar)
100 psi
(6.90 bar)
15 - 75 gpm
(3407 - 17034L/hr)
PRXF-LV-40
40 psi
(2.76 bar)
125 psi
(8.62 bar)
15 - 75 gpm
(3407 - 17034L/hr)
PRXF-LV-50
50 psi
(3.45 bar)
125 psi
(8.62 bar)
15 - 75 gpm
(3407 - 17034L/hr)
Caution:
Always install pressure regulators downstream from all shut-off valves
Be sure to install pressure regulators in the proper direction. The arrow on the upper housing shows the direction of the flow and should always point downstream toward applicators.
Senninger’s Extended Flow Pressure-Master Regulator is now available in a new Limit Valve model. The PRXF-LV is designed to limit static (no flow) water pressure between the regulation point and a downstream shut-off valve, thus protecting in-line components. It can handle flows up to 75 gpm [17034 L/hr]. It is ideal for installations requiring accurate zone pressure regulation. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.
