Senninger’s High Flow Pressure Regulator is ideal for installations requiring higher flows including solid set sprinkler, low volume manifolds and mechanical-move irrigation systems. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.
Features
• 100% water tested for accuracy
• Maximum flow path resists plugging
• Very low hysteresis and friction loss • Pressures: 10-50 psi (0.69-3.45 bar) • Flows: 10 - 32 gpm (2271 - 7268 L/hr)
• Inlet sizes: 1 1/4” F NPT
• Outlet sizes: 1” F NPT, 1 1/4” F NPT
• Backed by 2-year warranty on materials, workmanship and performance
Model #
Preset Operating
Maximum Inlet Pressure
Flow Range
PR-HF-10
10 psi (0.69 bar)
60 psi (4.14 bar)
10-32 gpm
(2271 - 7268 L/hr)
PR-HF-15
15 psi (1.03 bar)
80 psi (5.52 bar)
10-32 gpm
(2271 - 7268 L/hr)
PR-HF-20
20 psi
(1.38 bar)
100 psi (6.90 bar)
10-32 gpm
(2271 - 7268 L/hr)
PR-HF-25
25 psi
(1.72 bar)
100 psi
(6.90 bar)
10-32 gpm
(2271 - 7268 L/hr)
PR-HF-30
30 psi
(2.07 bar)
100 psi
(6.90 bar)
10-32 gpm
(2271 - 7268 L/hr)
PR-HF-40
40 psi
(2.76 bar)
100 psi
(6.90 bar)
10-32 gpm
(2271 - 7268 L/hr)
PR-HF-50
50 psi
(3.45 bar)
100 psi
(6.90 bar)
10-32 gpm
(2271 - 7268 L/hr)
Caution:
Always install pressure regulators downstream from all shut-off valves
Be sure to install pressure regulators in the proper direction. The arrow on the upper housing shows the direction of the flow and should always point downstream toward applicators.
Senninger’s High Flow Pressure Regulator is ideal for installations requiring higher flows including solid set sprinkler, low volume manifolds and mechanical-move irrigation systems. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.
