Senninger Irrigation

PMR-MF

PMR-MF – Pressure Master Regulator®

Medium Flow

Ideal for installations requiring mid-range flows.

Applications: Drip and Low Volume, Nursery and Greenhouse, Solid Set, Pivots & Linear Systems, Effluent Applications
 

Features

• Low hysteresis and friction loss

• Can be installed above or below ground

• Large flow path resists plugging

• CMS Mining and Effluent models available

 

Model # Flow Range Preset Operating Pressure Maximum Inlet Pressure Inlet Sizes Outlet Sizes
PMR-MF-6 4 – 16 gpm
(909 – 3634 L/hr)
6 psi
(0.41 bar)
80 psi
(5.51 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-10 4 – 16 gpm
(909 – 3634 L/hr)
10 psi
(0.69 bar)
90 psi
(6.20 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-12 2 – 20 gpm
(454 – 4542 L/hr)
12 psi
(0.83 bar)
90 psi
(6.20 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-15 2 – 20 gpm
(454 – 4542 L/hr)
15 psi
(1.03 bar)
95 psi
(6.55 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-20 2 – 20 gpm
(454 – 4542 L/hr)
20 psi
(1.38 bar)
100 psi
(6.89 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-25 2 – 20 gpm
(454 – 4542 L/hr)
25 psi
(1.72 bar)
105 psi
(7.24 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-30 2 – 20 gpm
(454 – 4542 L/hr)
30 psi
(2.07 bar)
110 psi
(7.58 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-35 2 – 20 gpm
(454 – 4542 L/hr)
35 psi
(2.41 bar)
115 psi
(7.93 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-40 2 – 20 gpm
(454 – 4542 L/hr)
40 psi
(2.76 bar)
120 psi
(8.27 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-50 2 – 20 gpm
(454 – 4542 L/hr)
50 psi
(3.45 bar)
130 psi
(8.96 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)
PMR-MF-60 2 – 20 gpm
(454 – 4542 L/hr)
60 psi
(4.14 bar)
140 psi
(9.65 bar)
¾” NPT (F); 1” NPT (F); 1” BSPT (F) ¾” NPT (F); 1” NPT (F); 1” BSPT (F)

Note: With no flow through the regulator, the inlet and outlet pressures will be the same.
Always install downstream from all shut-off valves.

For more information click on this link: PMR-MF Specifications Sheet

Get More Detailed Information

pressure regulator guidePressure Regulator Guide
(English)
solid_set_catalog_imageSolid Set Catalog
(English) (Spanish) (Portuguese)
Solid Set Irrigation ProductsSolid Set Irrigation Products Overview
(English) (Spanish) (Portuguese) (Russian)
Mechanized Irrigation Products OverviewMechanized Irrigation Products Overview
(English) (Spanish) (Portuguese) (Russian)

Instructions: Click on the image below to open the FAQ App

Frequently asked questions about pressure regulators

Close Spacing with Bubblers

Texas farmers are mounting Bubblers with just 30 inch spacing between heads and maximizing their water usage with a combination of LEPA (Low Energy Precision Application) sprinklers and conservation tillage practices.

FROM THE BLOG
  • Drip vs Overhead Irrigation (Part 5) Originally published in Growing Magazine’s July 2014 issue. Minimal investments for a strong ROI For large-scale commercial growers, overhead irrigation is more economically feasible. Drip systems typically cost $500 to $1,200 or more ... Learn more »
  • Drip vs Overhead Irrigation (Part 4) Originally published in Growing Magazine’s July 2014 issue. Less Complicated Farm Management at a Lower Cost After switching to drip irrigation, growers initially use less water, save money and get similar yields ... Learn more »


Senninger Irrigation

Senninger Irrigation
Senninger
A Hunter Industries Company
16220 East Highway 50
Clermont, FL 34711

Office: (407) 877-5655


Site Credits: Z to A Creative

STAY CONNECTED:   Senninger Irrigation  Senninger Irrigation
Senninger Irrigation