T-Spray™

Riser Adapter

The Riser Adapter gives growers the flexibility to use sprinklers in more than one area. Sprinklers connect to the adapter without the need for gluing or fusing. Just disconnect the riser adapter assembly to remove the sprinklers. Use a plug for the bushings in the lateral.

Riser Stake

The Riser Stake is now available in either 26” or 14” length models. It can be used for direct mounting a barbed base Micro-Sprinkler into 0.25”, 0.270”, or 8 mm tubing, or for use with a ½” M NPT connection Micro-Sprinkler or spray nozzle.

For best results, the Riser Stake should be installed at least 1/3 its length into the ground.

Drop Assembly

The Senninger Drop Assembly offers simple, fast and economical installation of inverted Micro-Sprinklers. It comes in overall lengths of 3, 4 or 6 ft (0.91, 1.22 or 1.83 m).

Pressure Regulators

Senninger® pressure regulators control excessive and varying inlet pressures to a constant outlet pressure. They allow a system to maintain an accurate flow output at each sprinkler head to ensure proper distribution uniformity.

Recognizing the importance of maintaining correct system pressure and uniform distribution, Senninger offers various models to meet specific flow and installation requirements.